The Forum Has Moved!

Harrison Mills cams are still down this morning from the power failure the other day. Can't get into the ptz cams either.

Darlene, I will let Ken know but it may be because the cam hasn't finished it's normal recycle after the power outage.

Quote by: jkr

Darlene, I will let Ken know but it may be because the cam hasn't finished it's normal recycle after the power outage.

Thanks Judy!

Ken called to say if the Harrison cam fails to recycle it will be next week sometime before he is able to make a site visit.

11.24a All White Rock cams are now down

I will let Ken know


Note To All:
Ken is in the process of moving and doing renovations. He has internet at one place but not at the other so it may take time before he is available to check into camera situations. He will get to things in due process.
Thank you for your patience.

I'm not able to view any of our embedded cams.

Lafarge is streaming when I log in directly with the zoomer link.

Delta 2 west is working with the zoomer link, and I got D3 East on the third try

Was able to connect to the three function White Rock cams (South needs a site visit)

All of the embedded cam links for the above cams are saying they've been offline about 105 minutes - which makes me think they all went down together, which makes me suspect the issue is at WildEarth. I will check their site, then send a message to Peter.

Harrison Mills is a different issue, and may require a site visit after being down from the power outage in the area.

Most embedded cams are back. I got a phone call before I could contact WE, and when I got done, I found that both Delta cams, White Rock WA and CU, and Lafarge embedded cams are streaming, so someone must have rebooted something. Thanks, Peter or whoever!

We still need WE to do something to get the new North embedded cam at White Rock streaming again, and as mentioned before, we'll need a site visit (or a lot of luck) to get the Harrison Mills cams going again.